home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000 #2
/
Ham Radio 2000 - Volume 2.iso
/
HAMV2
/
SATELLIT
/
TRAK405
/
READ.ME
< prev
next >
Wrap
Text File
|
1997-01-25
|
10KB
|
208 lines
TRAKSAT Version 4.03
25 Jan. 1997
Please report any troubles and suggestions to:
E-Mail: wintrak@traveller.com
Home Page: http://www.hsv.tis.net/~wintrak
Or:
Snail Mail:
Paul E. Traufler
111 Emerald Dr.
Harvest, AL 35749 USA
What is it man!!??
TRAKSAT is a general purpose satellite tracking program, by that
I mean any satellite that has a NORAD, NASA 2-Line element set
can be used. The solution to the satellite motion which is used
by TRAKSAT is completely analytic and therefore requires no
numerical integration. This makes the program fast, even faster
when a coprocessor is used, since the solutions can be evaluated
at arbitrarily large, or small, time intervals.
The purpose of this program is to provide the user with a means
of propagating NORAD element sets in time to obtain tracking
information of the space object.
What is new?
New with this version is two fully rendered 3D earth views with full
color Sun/Shadow. These views are breath taking! TRAKSAT is now a
fully protected mode program with no DOS 640K limits! The program
uses Extended or Expanded memory and requires only 250K of free
RAM. This is the FOURTH major re-write of the program and is
considered the best by all the trial users.
The program has expaned on-line help along with better and additional
error checking. Speed and features are what is it all about.
LOOK>>>>
********************************************************************
New with this version and up, registered users will receive update
notices via E-mail ONLY. There will be no mail notices sent out and
notice will be sent to users who have registered the program and
have a valid E-mail address.
Please register the program with the form supplied (ORDER.FRM) and
include your E-mail address.
********************************************************************
LOOK>>>>-------------------------------------------------------------------
We have contracted with Northstar Solutions to take credit card orders
now. To order with a credit card please dial 1-800-699-6395 (10am -
8pm EST, Monday thur Saturday). Ask for TRAKSAT Order #1172.
*** CREDIT CARD ORDERS ONLY ***
(They do NOT provide technical support.)
Northstar Solutions
1-800-699-6395 (US only 10am -8pm EST, Mon-Sat)
1-803-699-6395 (Worldwide 10am -8pm EST, Mon-Sat)
FAX 1-803-699-5465 (24 hours)
*** TRAKSAT Order Number 1172 ***
-------------------------------------------------------------------
******************
* IMPORTANT NOTE *
******************
The NORAD satellite data set included with TRAKSAT contains the
elements for over 750 satellites. HOWEVER this data will be
several weeks old by the time MOST people obtain this program.
The elements included can be used to run the program through its
paces but updated elements will be required in order to make
accurate predictions. For more information on satellite elements
see Chapter 11.
Did you get a complete copy of the program? The following files
SHOULD have been included in the archive file.
TRAKSAT.EXE The program.
TRAKSAT.INI The default data for TRAKSAT.
TRAKSAT.CTY The city file for tracking stations.
TRAKSAT.DOC TRAKSAT program documentation.
TRAKSAT.HLP TRAKSAT help file.
TRAKSAT.NDX TRAKSAT help file index.
EARTH.DAT World map data file.
EARTH.BIN World map data file.
TLE.TXT This is the latest NORAD satellite data set,
READ.ME Latest notes about the program.
TRAK.NEW New features for this version.
MODERN.FON This is a font file used for the graphics.
FONT.VGA This is a font file used for the menus.
ORDER.FRM This file contains TRAKSAT order forms.
STAR6A.BIN This is a star data base that is NOT required
to run TRAKSAT, it is optional. This data file
can be used in the external star data
option. It has all stars to magnitude 6.0
in it.
What do I need to run the program? In order to run the program
the user will need the following hardware/software;
IBM or 100% compatible AT,PS/2,286,386,486, 2MB
Ram (250K free ram is required), Floppy or Hard
Disk (approximately 1Meg free), Text mode display
(25x80), CGA, EGA, VGA, or SVGA graphics, HIMEM or
some other memory manager installed.
Math coprocessor is NOT required BUT RECOMMENDED,
(IF A COPROCESSOR IS PRESENT IT WILL BE USED *),
PC DOS or MS DOS VERSION 5.0 or above. This version of
TRAKSAT WILL NOT RUN ON XT (8088) COMPUTERS, if you
are still using a XT computer for satellite tracking
you will need to use Version 3.03 or UPDATE the
computer.
* It should be noted that a coprocessor will be 3 to 4 times
faster than the emulator version. If the user plans on using the
real-time tracking mode, a coprocessor will "smooth out" the time
steps to such a small delta as to appear instantaneously. At any
rate the real-time mode runs as fast as the host computer can
calculate the data and update the screen.
******************
* IMPORTANT NOTE *
******************
This version of TRAKSAT will NOT run on XT (8088) computers, a
286 AT class computer is the minimum hardware supported.
==> INSTALLING TRAKSAT
TRAKSAT is available from many BBS's and shareware firms and
normally stored in a compressed format such as ZIP. The user will
be required to uncompress the files by whatever means it was
compressed with first. To install the program first create a
directory on your hard disk. Type "C:" <Enter> then "md\trak403"
<Enter> to create a directory named C:\TRAK403. (Do not type the
quotes, the <Enter> means press the Enter or Return key.) Then
type "cd\trak403" to go to this directory. If your hardware is
different substitute the required changes as needed.
Next copy ALL the files to the just created directory on your
hard disk. That is all that is required to run the program. Read
Chapter 2 (User Options) for additional details on user set
options that you may want. IT IS STRONGLY SUGGESTED THAT YOU
SET THE OUTPUT PATH IN THE TRAKSAT.INI FILE. If you do not set
the path the program may over write output files.
Running The Program
To start TRAKSAT you type "TRAKSAT", without the quotation marks,
at the DOS prompt. Several command-line options are available to
modify the start-up of the program. See Chapter 2 for details.
If all is well the program will startup with a Tabular mode
tracking the Mir satellite.
Pressing F1 will bring up the online help.
SUGGESTED additions to your CONFIG.SYS file (386,486 systems):
DEVICE=HIMEM.SYS
DOS=HIGH,UMB
FILES = 50
BUFFERS=17
STACKS=9,256
If you do not know if you have expanded/extended memory type
"MEM" at the DOS prompt. Below is an example output from MEM that
displays the current memory conditions.
C:\TRAKSAT>MEM
655360 bytes total conventional memory
655360 bytes available to MS-DOS
632688 largest executable program size
6651904 bytes total EMS memory <== This is EXPANDED MEMORY
6062080 bytes free EMS memory
7602176 bytes total contiguous extended memory
0 bytes available contiguous extended memory
6062080 bytes available XMS memory
MS-DOS resident in High Memory Area <== DOS loaded HIGH
That's All Folks!
Paul E. Traufler
<End of File>